SYSTEMATIC LITERATURE REVIEW ON 3D PRINTING PERSONALISED FOOD FOR THE ELDERLY
Article Sidebar
Main Article Content
Abstract
Three-dimensional (3D) printing is currently a new technology being developed in the food industry due to its ability to design, customize, and fabricate a product with good precision and accuracy. Therefore, with regard to the mastication problems frequently faced by elderly people, this technology is utilized to design foods that can be consumed by them. Since there was limited published literature on the subject, the present study aimed to systematically review 3D printing personalized food for the elderly. The study used PRISMA as a guideline for report writing while integrating multiple research designs. This paper employed three databases to select the articles: Science Direct, Scopus, and Google Scholar. The study included five analyzed themes: 1) hardness; 2) moisture; 3) viscosity; 4) elasticity; and 5) printability. The study significantly contributed to several practical purposes and the body of knowledge. The findings provided the factors affecting the 3D printing of food, its mechanisms, and its significance.
Downloads
Article Details
Transfer of Copyrights
- In the event of publication of the manuscript entitled [INSERT MANUSCRIPT TITLE AND REF NO.] in the Malaysian Journal of Science, I hereby transfer copyrights of the manuscript title, abstract and contents to the Malaysian Journal of Science and the Faculty of Science, University of Malaya (as the publisher) for the full legal term of copyright and any renewals thereof throughout the world in any format, and any media for communication.
Conditions of Publication
- I hereby state that this manuscript to be published is an original work, unpublished in any form prior and I have obtained the necessary permission for the reproduction (or am the owner) of any images, illustrations, tables, charts, figures, maps, photographs and other visual materials of whom the copyrights is owned by a third party.
- This manuscript contains no statements that are contradictory to the relevant local and international laws or that infringes on the rights of others.
- I agree to indemnify the Malaysian Journal of Science and the Faculty of Science, University of Malaya (as the publisher) in the event of any claims that arise in regards to the above conditions and assume full liability on the published manuscript.
Reviewer’s Responsibilities
- Reviewers must treat the manuscripts received for reviewing process as confidential. It must not be shown or discussed with others without the authorization from the editor of MJS.
- Reviewers assigned must not have conflicts of interest with respect to the original work, the authors of the article or the research funding.
- Reviewers should judge or evaluate the manuscripts objective as possible. The feedback from the reviewers should be express clearly with supporting arguments.
- If the assigned reviewer considers themselves not able to complete the review of the manuscript, they must communicate with the editor, so that the manuscript could be sent to another suitable reviewer.
Copyright: Rights of the Author(s)
- Effective 2007, it will become the policy of the Malaysian Journal of Science (published by the Faculty of Science, University of Malaya) to obtain copyrights of all manuscripts published. This is to facilitate:
(a) Protection against copyright infringement of the manuscript through copyright breaches or piracy.
(b) Timely handling of reproduction requests from authorized third parties that are addressed directly to the Faculty of Science, University of Malaya. - As the author, you may publish the fore-mentioned manuscript, whole or any part thereof, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
You may produce copies of your manuscript, whole or any part thereof, for teaching purposes or to be provided, on individual basis, to fellow researchers. - You may include the fore-mentioned manuscript, whole or any part thereof, electronically on a secure network at your affiliated institution, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
- You may include the fore-mentioned manuscript, whole or any part thereof, on the World Wide Web, provided acknowledgement regarding copyright notice and reference to first publication in the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers) are given.
- In the event that your manuscript, whole or any part thereof, has been requested to be reproduced, for any purpose or in any form approved by the Malaysian Journal of Science and Faculty of Science, University of Malaya (as the publishers), you will be informed. It is requested that any changes to your contact details (especially e-mail addresses) are made known.
Copyright: Role and responsibility of the Author(s)
- In the event of the manuscript to be published in the Malaysian Journal of Science contains materials copyrighted to others prior, it is the responsibility of current author(s) to obtain written permission from the copyright owner or owners.
- This written permission should be submitted with the proof-copy of the manuscript to be published in the Malaysian Journal of Science
References
Braun, V., & Clarke, V. (2006). Using thematic analysis in psychology. Qualitative Research in Psychology, 3(2), 77–101.
Çakmak, H., & Gümüş, C. (2020). 3D Food Printing with Improved Functional Properties: A Review. International Journal Of 3D Printing Technologies and Digital Industry, 4(2), 178–192.
Chen, H., Xie, F., Chen, L., & Zheng, B. (2018). Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors. Journal of Food Engineering, 244, 150–158.
Dankar, I., Pujolà, M., El Omar, F., Sepulcre, F., & Haddarah, A. (2018). Impact of Mechanical and Microstructural Properties of Potato Puree-Food Additive Complexes on Extrusion-Based 3D Printing. Food and Bioprocess Technology, 11(11), 2021–2031.
Derossi, A., Caporizzi, R., Oral, M., & Severini, C. (2020b). Analyzing the Effects of 3D Printing Process Per Se on The Microstructure and Mechanical Properties of Cereal Food Products. Innovative Food Science & Emerging Technologies, 66, 102531.
Derossi, A., Caporizzi, R., Paolillo, M., & Severini, C. (2020a). Programmable Texture Properties of Cereal-Based Snack Mediated by 3D Printing Technology. Journal of Food Engineering, 289, 110160.
Dick, A., Bhandari, B., Dong, X., & Prakash, S. (2020). Feasibility Study of Hydrocolloid Incorporated 3D Printed Pork as Dysphagia Food. Food Hydrocolloids. Food Hydrocolloids, 107, 105940.
Flemming, K., Booth, A., Garside, R., Tunçalp, O., & Noyes, J. (2018). Qualitative evidence synthesis for complex interventions and guideline development: clarification of the purpose, designs and relevant methods. BMJ Global Health, 4(1), e000882.
García-Segovia, P., García-Alcaraz, V., Balasch-Parisi, S., & Martínez-Monzó, J. (2020). 3D printing of gels based on xanthan/konjac gums. Innovative Food Science & Emerging Technologies, 64, 102343.
Gou, M., Wu, H., Saleh, A. S., Jing, L., Liu, Y., Zhao, K., ... & Li, W. (2019). Effects of Repeated and Continuous Dry Heat Treatments on Properties of Sweet Potato Starch. International Journal of Biological Macromolecules, 129, 869–877.
Haddaway, N., Macura, B., Whaley, P., & Pullin, A. (2018). ROSES Reporting standards for Systematic Evidence Syntheses: pro forma, flow-diagram and descriptive summary of the plan and conduct of environmental systematic reviews and systematic maps. Environmental Evidence, 7(1). 1–8.
Hamilton, C. A., Alici, G., & in het Panhuis, M. (2018). 3D printing Vegemite and Marmite: Redefining “breadboards”. Journal of Food Engineering, 220, 83–88.
Huang, M. S., Zhang, M., & Bhandari, B. (2019). Assessing the 3D Printing Precision and Texture Properties of Brown Rice Induced by Infill Levels and Printing Variables. Food and Bioprocess Technology, 12(7), 1185–1196.
Jonkers, N., van Dommelen, J. A. W., & Geers, M. G. (2020). Experimental characterization and modeling of the mechanical behavior of brittle 3D printed food. Journal of Food Engineering, 278, 109941.
Kim, H.W., Bae, H., Park, H.J., (2018). Reprint of: Classification of the printability of 310 selected food for 3D printing: Development of an assessment method using hydrocolloids as 311 reference material. Journal of Food Engineering, 220, 28–37.
Liberati, A., Altman, D. G., Tetzlaff, J., Mulrow, C., Gøtzsche, P. C., Ioannidis, J. P., ... & Moher, D. (2009). The PRISMA Statement for Reporting Systematic Reviews and Meta-Analyses of Studies That Evaluate Health Care Interventions: Explanation and Elaboration. Journal of Clinical Epidemiology, 62(10), e1–e34.
Liu, L., & Ciftci, O. N. (2020). Effects of High Oil Compositions and Printing Parameters on Food Paste Properties and Printability in A 3D Printing Food Processing Model. Journal of Food Engineering, 288, 110135.
Liu, Y., Liu, D., Wei, G., Ma, Y., Bhandari, B., & Zhou, P. (2018). 3D printed milk protein food simulant: Improving the printing performance of milk protein concentration by incorporating whey protein isolate. Innovative Food Science & Emerging Technologies, 49, 116–126.
Maniglia, B. C., Lima, D. C., Junior, M. D. M., Le-Bail, P., Le-Bail, A., & Augusto, P. E. (2019). Preparation of Cassava Starch Hydrogels for Application in 3D Printing Using Dry Heating Treatment (DHT): A Prospective Study on The Effects of DHT and Gelatinization Conditions. Food Research International, 128, 108803.
Maniglia, B. C., Lima, D. C., da Matta Júnior, M., Oge, A., Le-Bail, P., Augusto, P. E., & Le-Bail, A. (2020). Dry heating treatment: A potential tool to improve the wheat starch properties for 3D food printing application. Food Research International, 137, 109731.
Moher, D., Liberati, A., Tetzlaff, J., & Altman, D. (2009). Preferred Reporting Items for Systematic Reviews and Meta-Analyses: The PRISMA Statement. Plos Medicine, 6(7), e1000097.
Okoli, C. (2015). A Guide to Conducting a Standalone Systematic Literature Review. Communications of The Association for Information Systems, 37(1), 879–910.
Oyinloye, T., & Yoon, W. (2021). Stability of 3D printing using a mixture of pea protein and alginate: Precision and application of additive layer manufacturing simulation approach for stress distribution. Journal of Food Engineering, 288, 110127.
Page, M. J., & Moher, D. (2017). Evaluations of the Uptake and Impact of The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Statement and Extensions: A Scoping Review. Systematic Reviews, 6(1), 263.
Shaffril, H., Samsuddin, S., & Abu Samah, A. (2020b). The ABC of systematic literature review: the basic methodological guidance for beginners. Quality & Quantity, 1–28.
Shaffril, H., Ahmad, N., Samsuddin, S., Samah, A., & Hamdan, M. (2020a). Systematic literature review on adaptation towards climate change impacts among indigenous people in the Asia Pacific regions. Journal of Cleaner Production, 258, 120595.
Vieira, M. V., Oliveira, S. M., Amado, I. R., Fasolin, L. H., Vicente, A. A., Pastrana, L. M., & Fuciños, P. (2020). 3D printed functional cookies fortified with Arthrospira platensis: Evaluation of its antioxidant potential and physical-chemical characterization. Food Hydrocolloids, 107, 105893.
Zheng, L., Yu, Y., Tong, Z., Zou, Q., Han, S., & Jiang, H. (2019). The Characteristics of Starch Gels Molded by 3D Printing. Journal of Food Processing and Preservation, 43(7), e13993.